4’x4′ CNC Plasma Cutting Table

4' x 4' CNC Plasma Tables

Our 4'x4' CNC Plasma Cutting Table can be a very functional machine for manufacturing & fabrication shops of all sizes.

For smaller spaces, the 4'x4' plasma cutting table provides incredible manufacturing capacity in a very small space.

Maybe you have a little extra space that you want to use for added production capacity. Possibly you manufacture small components and primarily use 4'x'4' flat stock for cutting.

If you have a smaller space or primarily cut smaller stock, the 4'x4' table is probably all you need. The 4'x4' CNC plasma cutting table is a great solution for adding production capacity to small spaces.

Need to cut pipe too? Ask about our Rotary Add-On, and other available options to add more functionality to your machine.

  • 4×8-Plasma-Table-FL
  • 4×8-Plasma-Table-C
  • 4×8-Plasma-Table-FR
  • 4×8-Plasma-Table-BL
  • 4×8-Plasma-Table-BR

4'x4' Plasma Tables & Available Options


 

1. Air Bladder Water Table

This system uses compressed air to raise and lower the water level.  Much more effective at reducing warpage and collecting smoke and grit than just a water tray.  You can easily change the water level to your desired height via shop air.  No pumps, no moving parts, and cheaper than our competitors water tray which requires adding water or draining water to change water level. This is by far our top seller.

2. Down Draft Ready

This system is comprised of a full metal skirt and bottom, below the cutting area. Customer must supply blower and duct work to evacuate fumes outside.  Your attached vacuum will pull the grit through. We can assist in sizing blower.

3. Slats Only

This system comprises cutting deck only. Any grit will fall straight through the slats an onto the floor. Good choice for the beginner who wants to get in a plasma table at the lowest cost.


Plasma Table Options


Available Options for CNC Plasma Table

Take Advantage of OEM Pricing for Hypertherm Plasma Torches

Hypertherm Plasma Torches have led the industry for quality and innovation. Hypertherm is the brand that so many manufacturers have learned to trust for a quality plasma torch.  We are official OEM suppliers for Hypertherm Plasma Torches.


Plate markers, otherwise known as Pneumatic Scribes, are a great option to mark individual components.  The plate marker attaches to same x-axis back plate. You do not need to remove torch to use it. Seamlessly integrated with your software, just pick the “plate marker” tool when generating cutting paths and the computer takes care of the rest. Great for marking logos or part numbers.

*The Plate Marker tool must be built into your machine on the original order. This tool cannot be added to your machine after it is built.

Scribe-Close-Up

We can provide a 2.25HP Porter Cable router, with custom control screen/profile mounting plate and clamps fully wired and ready to run. Other size routers are available.

Router

This system comprises a rotary headstock, pipe/tube support, all electronics and software so you can cut round stock. Can be mounted on side or front of machine.

Rotary-Add-On---Rollers

Rollers

Rotary-Add-On---Head-Stock

Head Stock

Rotary-Add-On-Torch-Mount

Extension Arm

Rotary-Add-On-Extension-Arm

Extension Arm

Oxygen Acetylene RelayThis allows you to use an oxy torch on thicker plate. System comes with all software/custom macros and wiring. We do not provide solenoid, torch, or gas lines.
Servo-MotorPlease read the FAQ page for information on steppers versus servos motors. If servos are desired we can provide that.

Options Image Gallery

Click to Englarge


Learn More About LDR Plasma Cutting Systems


Pricing & Shipping

Industrial Strength. Industrial Quality. Exceptional pricing. 

Learn more about pricing and shipping information

Pricing

Have a Question about our 4'x4' Plasma Tables?

Give us a call, we're here to help.

We'll help you find the right machine for your needs.

Contact Us

LDR Motion Systems - Industrial Quality Without the Industrial Price